FILO MINING PLANS EXTENSIVE DRILL PROGRAM FOR THE UPCOMING 2019 / 2020 FIELD SEASON
LOOKING TO EXPAND THE CURRENT INDICATED RESOURCE OF 4.4 MILLION OUNCES OF GOLD AND 147 MILLION OUNCES OF SILVER AND 3.1 BILLION POUNDS OF COPPER
Vancouver - August 8, 2019 /CNW/: Filo Mining Corp. (TSX-V, Nasdaq First North: FIL) ("Filo Mining”, or the “Company”) is pleased to announce plans for the upcoming field season at its 100% owned Filo del Sol project located on the border of Region III, Chile and San Juan Province, Argentina. Expected to kick off in early November of 2019, the Company is planning an approximately 15,000m diamond drill campaign and a full 3D induced polarization (IP) geophysical survey at the Filo del Sol Project in order to better understand the high-grade gold mineralization encountered during the 2018/2019 drill campaign and to continue to explore the extensive gold-copper-silver mineralized system which hosts the Filo del Sol deposit. The mineral resource at Filo spans a north-south distance of almost 3 kilometres and appears open in both directions. Refer to the attached plan map outlining proposed targeted areas for the 2019/2020 program.
Commenting on the upcoming program, President and CEO Adam Lundin stated, “The successful exploration results arising out of the 2018/2019 drill program highlighted the potentially transformative upside for our flagship asset’s size, scope and economic potential. The upcoming season will follow up on what we believe are the two most important results of the past season – confirmation of high-grade, structurally-controlled gold zones within the Filo del Sol deposit, and extension of the known mineralization to a depth of more than 1,000 metres below surface. We will also test the new Tamberias West area located southwest of the current mineral resource for additional oxide mineralization. With the support of Lundin Family Trusts, who are our largest shareholders we are looking forward to another exciting season of drilling at Filo del Sol as we pursue these opportunities and continue to deliver shareholder value.”
The Tamberias West area is a previously unexplored, recently permitted area to the southwest of the Filo del Sol deposit which has been identified with surface indications of epithermal style gold-copper mineralization.
The field program will be supported by a better understanding of effective diamond drilling strategies and the collection of a comprehensive geophysical dataset over the project area including drone magnetometer and state of the art 3D IP surveys.
A summary of the proposed 2019/2020 drill targets is discussed below and the Company continues to review all financing options with respect to the planned field program.
High-Grade Gold Zones
Previous reverse-circulation (RC) drilling at Filo intersected high-grade gold zones that have, to date, been difficult to characterize geologically as RC drilling produces only small chips, making it difficult to recognize geological features. Two of the diamond holes drilled last year also intersected these zones, returned some of the highest-grade gold intercepts at the project to date, and the diamond core provided more detailed information about them. These new holes showed that the high-grade gold zones are controlled by steeply-dipping structures which would make them difficult to identify and interpret from the previous RC holes, most of which were drilled vertically. Angled diamond drill holes will target these zones in order to better understand their geometry and grade distribution, with a potential to significantly increase the importance of these high-grade structures to the economics defined in the Pre-Feasibility Study. Structurally controlled high-grade zones like this are important to the economics of similar high sulfidation gold-silver deposits like Veladero, Pierina, and Yanacocha.
Intersections of these structures within the distinct, stratiform high-grade silver zone (M Zone) may be particularly important and will be a focus of this portion of the drilling program. Select intervals from the M Zone are shown in the tables below, illustrating the high-grade nature of this zone.
High-Grade Gold Intervals
|HOLE-ID||Year||From (m)||To (m)||Width (m)||Au g/t||Ag g/t|
High-Grade Silver Intervals
|HOLE-ID||Year||From (m)||To (m)||Length (m)||Au g/t||Ag g/t|
The above tables represent select intervals from drilling campaigns previously announced by Filo Mining (or its predecessor companies) between 2008 and 2019 and complete drilling results are available for review on SEDAR at www.sedar.com.
Holes FSDH025 and FSDH029 drilled during the past season both ended in mineralization at depths of 1,025 metres and 800 metres respectively, indicating that the Filo del Sol deposit is entirely open to expansion at depth. The mineral resource at Filo spans a north-south distance of almost 3 kilometres, and appears open in both directions. Several holes are planned to test the area beneath the deposit in a similar manner in order to begin to understand the deeper portion of the system and test for underlying porphyry mineralization which is known to have driven the epithermal system which makes up the deposit.
This deep drilling will be guided by the results of a 3D IP survey which will be completed during the early part of the field season. Previous IP surveys at Filo have shown that this is an effective technique to outline key geological features, including mineralization, however the depth penetration of earlier two dimensional (2D) surveys was limited, and 2D surveys are highly influenced by the direction of the survey lines, making it very difficult to identify geological features that are irregularly-shaped or not perpendicular to the line direction. Modern IP surveys collect data in a true 3D grid, allowing for much improved depth resolution and characterization of geological features independent of their orientation. A high-resolution drone magnetic survey is also planned in order to take advantage of several benefits of this survey type and provide good quality magnetic data.
The area to the north of the Filo deposit is characterized by strong alteration typical of shallow levels of epithermal deposits. Widely-spaced drilling in this area in previous seasons intersected sporadic mineralization indicating that the hydrothermal system continues well beyond the northern boundary of the mineral resource. Additional holes in this area will be guided by the results of the IP and mag surveys and will test the system at depth. RC hole VRC093, drilled in 2015 and the most northerly hole in the project, intersected 166 metres grading 0.24 g/t gold, 12 g/t silver and 0.15% copper. This hole is located almost two kilometres north of the northern edge of the mineral resource.
Detailed interpretation of alteration mineral zonation guided by short-wave infrared (SWIR) data suggests that the hottest part of the Filo del Sol alteration system occurs in the Filo North area, possibly indicating the location of a deep feeder zone to the known mineralization and representing a high-priority drill target.
One of the most important outcomes of the 2018/2019 field program was the recognition of steam-heated alteration and silicification, typical of the upper levels of the Filo epithermal system, in a new area of flat topography and limited outcrop to the southwest of the Filo del Sol deposit. The Company recently received drilling permits for this area and plans to drill it during the upcoming season in order to evaluate the potential for Filo epithermal style gold mineralization beneath this shallow alteration zone. The Company believes that success in this area would have the potential to significantly increase the oxide mineral resource.
Qualified Persons and Technical Notes
The scientific and technical disclosure for the Filo del Sol Project included in this news release have been reviewed and approved by Bob Carmichael, P. Eng. (BC) and/or James Beck, B.A.Sc., P.Eng. Mr. Carmichael is Filo Mining's Vice-President of Exploration and a Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI43-101”). Mr. Beck is Filo Mining’s Vice-President of Corporate Development and Projects and is also a Qualified Person under NI43-101.
Diamond drill holes are indicated by “DH” in the Hole ID and reverse circulation holes by “RC”. RC samples were collected at the drill site by Company personnel with splitting carried out at the Company’s Batidero field camp near the drill sites. Individual samples represent final splits from 2 metre intervals down the hole. Samples were delivered to the ALS preparation laboratory in Copiapo, Chile. Diamond drill core samples were cut at Filo Mining’s Batidero camp near the project site by Company personnel. Diamond drill core was sampled in 2 metre intervals. Core diameter is a mix of PQ, HQ and NQ depending on the depth of the drill hole. Samples were bagged and tagged at camp, and packaged for shipment by truck to San Juan, Argentina. Samples were delivered to the ALS preparation laboratory in Mendoza, Argentina. All samples were crushed and a 500g split was pulverized to 85% passing 200 mesh. The prepared samples were analyzed by ALS which is an accredited laboratory which is independent of the Company. Gold analyses were by fire assay fusion with AAS finish on a 30g sample. Copper and silver were analysed by atomic absorption following a 4 acid digestion. Samples were also analyzed for a suite of 36 elements with ICP-ES and a sequential copper leach analysis was completed on each sample. Copper and gold standards as well as blanks and duplicates (field, preparation and analysis) were randomly inserted into the sampling sequence for Quality Control. On average, 9% of the submitted samples are Quality Control samples. No data quality problems were indicated by the QA/QC program.
Mineralized zones within the Filo del Sol deposit are typically flat-lying, and drilled widths are interpreted to be greater than 90% of true widths. True widths of the high-grade gold zones are interpreted to be close to drilled widths, pending resolution of the actual geometry which is one of the goals of the 2019/2020 drill program.
Notes to accompany Filo del Sol Mineral Resource table:
- Mineral Resources have an effective date of 11 June 2018;
- The Qualified Person for the resource estimate is James N. Gray, P.Geo. of Advantage Geoservices Ltd.;
- The Mineral Resources were estimated in accordance with the CIM Definition Standards for Mineral Resources and Reserves;
- Sulphide copper equivalent (CuEq) assumes metallurgical recoveries of 84% for copper, 70% for gold and 77% for silver based on similar deposits, as no metallurgical testwork has been done the Sulphide mineralization, and metal prices of US$3/lb copper, US$1300/oz gold, US$20/oz silver. The CuEq formula is: CuEq=Cu+Ag*0.0089+Au*0.5266;
- All figures are rounded to reflect the relative accuracy of the estimate;
- Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability;
- The resource was constrained by a Whittle® pit shell using the following parameters: Cu $3/lb, Ag $20/oz, Au $1300/oz, slope of 45°, a mining cost of $2.50/t and an average process cost of $13.26/t;
- Cutoff grades are 0.2 g/t Au for the AuOx material, 0.15% CuEq for the CuAuOx material and 20 g/t Ag for the Ag material. These three mineralization types have been amalgamated in the Oxide total above. CuAuOx copper equivalent (CuEq) assumes metallurgical recoveries of 82% for copper, 55% for gold and 71% for silver based on preliminary metallurgical testwork, and metal prices of US$3/lb copper, US$1300/oz gold, US$20/oz silver. The CuEq formula is: CuEq=Cu+Ag*0.0084+Au*0.4239.
For details of the Mineral Resource Estimate, refer to the Company’s news release titled “Filo Mining Reports Updated Mineral Resource Estimate for the Filo del Sol Project” dated August 08, 2018 and available on the Company’s website at www.filo-mining.com.
Drill Hole Location Details
|HOLE-ID||UTM East||UTM North||Elevation||Length (m)||Azimuth||Dip|
Additional information regarding exploration, drilling, data verification, and the mineral resource estimate for the Filo del Sol project can be found in the Technical Report. The Technical Report was prepared for Filo Mining by Ausenco Engineering Canada Inc. (“Ausenco”). The Qualified Persons, as defined under NI 43-101, responsible for the Technical Report are Scott Elfen, P.E., Ausenco, Robin Kalanchey, P.Eng., Ausenco, Bruno Borntraeger, P.Eng., Knight Piesold Ltd., Fionnuala Devine, P.Geo., Merlin Geosciences Inc., Ian Stillwell, BGC Engineering Inc., Neil Winkelmann, FAusIMM, SRK Consulting (Canada) Inc., James N. Gray, P.Geo., Advantage Geoservices Limited, and Jay Melnyk, P.Eng., AGP Mining Consultants, all of whom are independent of Filo Mining. The Technical Report is available for review under the Company's profile on SEDAR at www.sedar.com and on the Company's website at www.filo-mining.com.
This information was submitted by Filo Mining Corp. for publication, through the agency of the contact person set out below, on August 8, 2019 at 5:00 pm Pacific time.
On behalf of the board of directors of Filo Mining,
Adam Lundin, President and CEO
Filo Mining Corp.
Cautionary Note Regarding Forward-Looking Statements
Certain statements made and information contained herein in the news release constitutes “forward-looking information” and “forward-looking statements” within the meaning of applicable securities legislation (collectively, “forward-looking information”). The forward-looking information contained in this news release is based on information available to the Company as of the date of this news release. Except as required under applicable securities legislation, the Company does not intend, and does not assume any obligation, to update this forward-looking information. Generally, this forward-looking information can frequently, but not always, be identified by use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or statements that certain actions, events, conditions or results “will”, "may", "could", "would", "might" or "will be taken", "occur" or "be achieved" or the negative connotations thereof. All statements other than statements of historical fact may be forward-looking statements.
Forward-looking statements contained in this news release include statements regarding the Company’s plans for the upcoming field season and proposed 2019/2020 drill targets at its 100% owned Filo del Sol project, planned exploration programs, potential upside at the Filo del Sol project, surface indications of epithermal style gold-copper mineralization on the Tamberias West area and a potential to significantly increase the oxide mineral resource, the results of the 2018/2019 field program drill program, and support of Lundin Family Trusts. In addition, this news release discusses the PFS that would support development of the Filo del Sol Project. Information concerning mineral resource/reserve estimates and the economic analysis thereof contained in the results of the PFS are also forward-looking information in that they reflect a prediction of the mineralization that would be encountered, and the results of mining, if a mineral deposit were developed and mined. Although Filo Mining believes that the expectations reflected in such forward-looking information are reasonable, undue reliance should not be placed on forward-looking information since Filo Mining can give no assurance that such expectations will prove to be correct. These statements involve known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those anticipated in such forward-looking information, including the risks, uncertainties and other factors identified in Filo's periodic filings with Canadian securities regulators, including, without limitation, those referred to in the “Risk and Uncertainties” sections, and elsewhere, in the Company’s MD&A for the year ended December 31, 2018 and for the interim period ended June 30, 2019, and in the most recent the Company's Annual Information Form available under the Company's profile at www.sedar.com. In addition, these statements involve assumptions made with regard to the Company's ability to develop the Filo del Sol Project and to achieve the results outlined in the PFS; the ability to raise the capital required to fund construction and development of the Filo del Sol Project; and the results and impact of future exploration at Filo del Sol.
The forward-looking information contained in this news release are made as at the date of this news release and Filo does not undertake any obligations to publicly update and/or revise any of the included forward-looking information, whether as a result of additional information, future events and/or otherwise, except as may be required by applicable securities laws. Forward-looking information is provided for the purpose of providing information about management's current expectations and plans and allowing investors and others to get a better understanding of the Company's operating environment. Forward-looking information is based on certain assumptions that the Company believes are reasonable, including that the current price of and demand for commodities will be sustained or will improve, the supply of commodities will remain stable, that the general business and economic conditions will not change in a material adverse manner, that financing will be available if and when needed on reasonable terms and that the Company will not experience any material labour dispute, accident, or failure of plant or equipment. These factors are not, and should not be construed as being, exhaustive. Although the Company has attempted to identify important factors that would cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated, or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. All of the forward-looking information contained in this document is qualified by these cautionary statements. Readers are cautioned not to place undue reliance on forward-looking information due to the inherent uncertainty thereof.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
For further information, please contact:
About Filo Mining
Filo Mining is a Canadian exploration and development company focused on advancing its 100% owned Filo del Sol copper-gold-silver deposit located in Chile's Region III and adjacent San Juan Province, Argentina. The Filo del Sol project is the subject of a recently completed Pre-Feasibility Study (“PFS”), and details of the project can be found in the 43-101 Technical Report detailing the results of that study titled "NI 43-101 Technical Report, Pre-Feasibility Study for the Filo del Sol Project" dated February 22, 2019 with an effective date of January 13, 2019 (the "Technical Report").
The Company's shares are listed on the TSX-V and on Nasdaq First North under the symbol "FIL". Filo Mining Corp. is a member of the Lundin Group of Companies.
The Company's certified advisor on Nasdaq First North is Pareto Securities AB, +46 8 402 50 00, firstname.lastname@example.org.
Elizabeth Hill Silver Project Acquisition Approved
Trading SymbolsAIM: UFOFWB: I3A1 25th September 2020 Alien Metals Ltd ("Alien Metals" or "the Company") KMG Shareholders approve sale of High-Grade Elizabeth Hill Silver Project to Alien Alien Metals Ltd (LSE AIM: UFO) ("Alien Metals" or "the Company"), a minerals exploration and development...
Exercise of Options
25 September 2020Dissemination of a Regulatory Announcement that contains inside information according to REGULATION (EU) No 596/2014 (MAR).Greatland Gold plc("Greatland" or "the Company") Exercise of Options Greatland Gold plc (LON:GGP), the London Stock Exchange AIM listed precious and base metals...
Second Price Monitoring Extn
Following the first price monitoring extension this security would still have executed more than a pre-determined percentage above or below the price of the most recent automated execution today. London Stock Exchange electronic order book users have a final opportunity to review the prices and size...
Date of AGM and Delay to Admission of Shares
25 September 2020AIM/ASX Code: SO4 SALT LAKE POTASH LIMITEDDATE OF AGM & CLOSING DATE FOR DIRECTOR NOMINATIONSDELAY TO ADMISSION OF SHARESSalt Lake Potash Limited (The Company) advises, in accordance with ASX Listing Rule 3.13.1, that the Company's Annual General Meeting (AGM) will be held on F...